: 1920x1080 px
: March 27, 2018
With ABS, sensors mounted at each wheel monitor the speed at which the wheels are turning. If one is turning slower than the others during braking, that indicates it is locking up, which could cause skidding and loss of steering control. ABS is supposed to intervene by rapidly "pumping" the brakes at the wheel that is locking up, allowing it to spin so that the driver retains braking and steering control.
Plug up the new motor. Plug the wiring harness into the window motor. This will provide power to the motor so use caution. Lower your window back into its correct place on the wiring harness. Remove the tape or re-install your window. Make sure that the tabs in the bottom of the window are properly aligned to bolt it back onto the regulator. Bolt the window to the regulator. Using the bolts you removed earlier and the same extension, you need to bolt your window back to the regulator. Test your window. It should now move up and down freely when you press the switch.