: 1000x1000 px
: July 4, 2018
In case you don't know who take your car to for auto electrical repairs, you can ask for references from fellow motorists; ideally friends and relatives who are unlikely to mislead you in this (potentially sensitive) matter. As long as they have faced such situations before, they are likely to guide you on which service providers to visit; or at least which service providers to avoid.
Attach the leads of the multi-meter to where the electrical wires come into the motor. Again, set it to DC volts and it should read 12 volts. Look for any interrupted voltage caused by a loose connector or corrosion. If there are any loose or corroded connections in the circuit they will disrupt the signal and cause your window to malfunction. Fix the connector or corroded areas. Push any connectors or wiring harnesses together tightly, and clean any corrosion away with a wire brush or similar tool. Test the window again. If your problem was in the circuitry and is now fixed, then your window should freely roll up and down without any restrictions or delays.