: 3264x2448 px
: July 4, 2018
An auto battery is built up of six cells, each containing stacked positive and negative lead plates. These are divided and separated by insulators and immersed in an electrolyte, a liquid blend of sulfuric acid and water. However, some batteries, use a gel instead of the electrolyte. This is considered to be safer and because you do not have to refill it with electrolyte, it has been labelled "maintenance-free". Each cell generates or more correctly put, stores 2.1 volts for a total of 12.6 volts.
Assuming that the battery is known to be good, then the next item to check is the battery terminals - the actual points at which the battery is connected into the electrical system. It is very important that these connections are clean and tight. This simple thing is often overlooked as a source of trouble, and is also a frequent cause of such trouble. Visually inspect the terminals, and clean andor tighten them if needed. To clean, use a small, stiff wire brush or a terminal cleaner which is made for the purpose.