: 1886x621 px
: June 29, 2018
The test procedure is quite simple. Set the meter to read DC volts, and set the correct range if needed. Some meters will select the correct range automatically. Nearly all meters will come with instructions on how to set them to read DC volts. Next, connect the meter across the vehicle battery, positive (+) to positive (+) and negative (-) to negative (-). With the engine running at a moderate idle - say 1200 to 1500 RPM, the meter should read approximately 13.8 to 14.8 volts and be steady. If the reading is substantially outside these figures and all other items mentioned have been tested and verified good, then the alternator is likely defective.
A good thing with battery checking and trouble shooting is that you need very little technical equipment. All you need is a good, old Digital Volt Ohm Meter and a charger for the battery. Each auto battery manufacturer uses a certain color in the battery 'eye' which tells whether a charge is needed. This is a fast and easy way to alert you for re-charging. Check out your battery manufacturer's specification of the 'eye' and everything associated with it.