: 1899x1230 px
: March 11, 2018
Fixing Wiring Problems: Find an electrical schematic of your vehicle. This can be found either from information in your owner's manual or on the Internet. Trace the wiring from the fuse panel to the switch. You should refer to your electrical schematic for help. You want to make sure that there are no breaks in the connection from the fuse box to the switch. If you did not find a schematic, it might be easier to trace the wiring from the switch back to the fuse box to look for any breaks in the connection.
Use a multi-meter to confirm that the switch is getting 12V of power. Attach the leads of the multi-meter to where the electrical wires come into the switch and set the meter to DC volts. It should read 12 volts. Trace the wiring from the switch to the motor. This is the path that a signal will travel to move your window when you press the switch. Any breaks or loose connections in this path will prevent your motor from functioning properly. Use the multi-meter to confirm that the motor is getting 12V of power.