: 1024x768 px
: July 7, 2018
All batteries, even those using gel instead of electrolyte lose charging capacity as the time passes. The reason for this is that the chemical breakdown of the connections inevitably takes place leading to the deterioration of the plates and loss of the electrolyte. When your vehicle has start up or charging problems, the vehicle troubleshooting procedure should start with a test of the battery. You do that with a visual check followed by a voltage test. If the battery is ok, other components of the electrical system is probably the reason, but battery problems are by far the most likely reason.
If the battery terminals are clean and tight, then the next item to check is drive belt tension. If the belt which drives the alternator is too loose, then the alternator will not produce enough electrical current to keep up with demand. Many modern vehicles utilize a single belt which drives the alternator and other accessories. This system usually also has an automatic belt tensioner which always maintains correct tension and is not adjustable. If your vehicle uses a wide, multigrooved or so-called "Serpentine" belt to drive the alternator, then it likely also has an automatic tensioning device.