: 1500x1500 px
: July 7, 2018
Here's what causes this: A blown fuse for the system, A wheel-speed sensor that is damaged or covered by road grime, A broken wire between the sensors and the ABS controller, An ABS controller that has stopped working. A pump and valve that apply the right amount of brake fluid pressure to each wheel to prevent locking can also trigger an ABS sensor warning light when those items go bad. If the red warning light for the regular brakes comes on, that typically means your vehicle is losing brake fluid or the brakes are so worn that you don't have normal stopping power. Either of those situations warrants immediate attention and possible repair work.
Fixing Wiring Problems: Find an electrical schematic of your vehicle. This can be found either from information in your owner's manual or on the Internet. Trace the wiring from the fuse panel to the switch. You should refer to your electrical schematic for help. You want to make sure that there are no breaks in the connection from the fuse box to the switch. If you did not find a schematic, it might be easier to trace the wiring from the switch back to the fuse box to look for any breaks in the connection.