: 1600x1600 px
: July 5, 2018
Unplug the wiring harness from the window motor. You will have to press down on the clip that holds the wiring harness into place and pull the harness out. These can be hard to press and sometimes it is best if you can get a screwdriver on it to press it in. Unbolt the harness andor motor from the door's interior. Any bolts holding the harness and motor will have to be removed.
Use a multi-meter to confirm that the switch is getting 12V of power. Attach the leads of the multi-meter to where the electrical wires come into the switch and set the meter to DC volts. It should read 12 volts. Trace the wiring from the switch to the motor. This is the path that a signal will travel to move your window when you press the switch. Any breaks or loose connections in this path will prevent your motor from functioning properly. Use the multi-meter to confirm that the motor is getting 12V of power.