: 1600x1600 px
: July 5, 2018
Assuming that the battery is known to be good, then the next item to check is the battery terminals - the actual points at which the battery is connected into the electrical system. It is very important that these connections are clean and tight. This simple thing is often overlooked as a source of trouble, and is also a frequent cause of such trouble. Visually inspect the terminals, and clean andor tighten them if needed. To clean, use a small, stiff wire brush or a terminal cleaner which is made for the purpose.
If the battery terminals are clean and tight, then the next item to check is drive belt tension. If the belt which drives the alternator is too loose, then the alternator will not produce enough electrical current to keep up with demand. Many modern vehicles utilize a single belt which drives the alternator and other accessories. This system usually also has an automatic belt tensioner which always maintains correct tension and is not adjustable. If your vehicle uses a wide, multigrooved or so-called "Serpentine" belt to drive the alternator, then it likely also has an automatic tensioning device.