: 1152x1728 px
: June 25, 2018
Attach the leads of the multi-meter to where the electrical wires come into the motor. Again, set it to DC volts and it should read 12 volts. Look for any interrupted voltage caused by a loose connector or corrosion. If there are any loose or corroded connections in the circuit they will disrupt the signal and cause your window to malfunction. Fix the connector or corroded areas. Push any connectors or wiring harnesses together tightly, and clean any corrosion away with a wire brush or similar tool. Test the window again. If your problem was in the circuitry and is now fixed, then your window should freely roll up and down without any restrictions or delays.
ABS stands for antilock braking system, and if the ABS warning light is illuminated in your car's gauge cluster, that means the antilock system has been deactivated because of a malfunction. Your car's regular brakes should work fine, but the antilock feature that prevents wheels from locking up during braking will not work. In addition, if your vehicle has stability control and traction control, those will be disabled as well because those systems rely on the same wheel-speed sensors as the antilock system.