: 1280x720 px
: June 25, 2018
All batteries, even those using gel instead of electrolyte lose charging capacity as the time passes. The reason for this is that the chemical breakdown of the connections inevitably takes place leading to the deterioration of the plates and loss of the electrolyte. When your vehicle has start up or charging problems, the vehicle troubleshooting procedure should start with a test of the battery. You do that with a visual check followed by a voltage test. If the battery is ok, other components of the electrical system is probably the reason, but battery problems are by far the most likely reason.
If your vehicle does not use an automatic tensioning device, then check belt tension as follows: With the engine turned off, grasp the belt at a convenient point about 8 to 10 inches from the alternator pulley. Move the belt slowly up and down. The belt should not move more than about 12 inch. If the belt seems to be excessively loose, then of course it will require tightening andor replacement.