: 1280x720 px
: June 28, 2018
With ABS, sensors mounted at each wheel monitor the speed at which the wheels are turning. If one is turning slower than the others during braking, that indicates it is locking up, which could cause skidding and loss of steering control. ABS is supposed to intervene by rapidly "pumping" the brakes at the wheel that is locking up, allowing it to spin so that the driver retains braking and steering control.
Locate a replacement fuse. It must be the rated for the same amperage as the original fuse that operated the window mechanism. The amp rating should be printed on the fuse, and it should also be listed in your owner’s manual. Do not use a fuse with a higher amp rating, as this may lead damaging the electrical components of your vehicle. Push the new fuse straight down into the cradle. The fuse must be "set". This means that it does not move or wobble. Turn your car key to the "on" position. This provides power to your windows and allows you to test them. You need not start your car. Test your windows. Confirm that they go up and down without restriction.