: 1350x1350 px
: December 13, 2017
You can also perform the test yourself if you have access to a Battery Load Tester, a device which is made for the purpose. The load tester works by placing a specific amount of electrical load on the battery for a specific amount of time while monitoring the available battery voltage. The battery should be fully charged before the test in order to insure accurate test results.
Here's what causes this: A blown fuse for the system, A wheel-speed sensor that is damaged or covered by road grime, A broken wire between the sensors and the ABS controller, An ABS controller that has stopped working. A pump and valve that apply the right amount of brake fluid pressure to each wheel to prevent locking can also trigger an ABS sensor warning light when those items go bad. If the red warning light for the regular brakes comes on, that typically means your vehicle is losing brake fluid or the brakes are so worn that you don't have normal stopping power. Either of those situations warrants immediate attention and possible repair work.