: 2550x3300 px
: July 1, 2018
Locate a replacement fuse. It must be the rated for the same amperage as the original fuse that operated the window mechanism. The amp rating should be printed on the fuse, and it should also be listed in your owner’s manual. Do not use a fuse with a higher amp rating, as this may lead damaging the electrical components of your vehicle. Push the new fuse straight down into the cradle. The fuse must be "set". This means that it does not move or wobble. Turn your car key to the "on" position. This provides power to your windows and allows you to test them. You need not start your car. Test your windows. Confirm that they go up and down without restriction.
Unplug the wiring harness from the window motor. You will have to press down on the clip that holds the wiring harness into place and pull the harness out. These can be hard to press and sometimes it is best if you can get a screwdriver on it to press it in. Unbolt the harness andor motor from the door's interior. Any bolts holding the harness and motor will have to be removed.