: 1500x1351 px
: June 26, 2018
Replacing a Faulty Switch: Locate the window switch panel. This is the button used to operate your window. It is almost always on the door, however, they are rarely found on the center console. Remove the window switch panel. Be careful not to scratch up the door panel while removing the window switch, as it often requires prying. Using a shop rag or piece of cardboard under your prying tool can help. Unplug the wiring connectors from the switch. You will need to test these connectors to make sure that they are providing the appropriate 12 volts to your switch.
If your motor is functioning properly but the window is not responding, you may need to replace your regulator. Remove the bolts that attach the regulator to the glass. The regulator is the lift assembly that moves your window up and down. You will have to move the window up or down to align these bolts with a hole in the door interior. Using an extension on a ratchet, you will put a socket (usually 8 or 10 mm) through the hole and loosen the two bolts. Push the window all the way up. Use your hands to push the window up, and then either fasten it with tape or pull it out of the door altogether.