: 1000x1000 px
: June 26, 2018
Plug up the new motor. Plug the wiring harness into the window motor. This will provide power to the motor so use caution. Lower your window back into its correct place on the wiring harness. Remove the tape or re-install your window. Make sure that the tabs in the bottom of the window are properly aligned to bolt it back onto the regulator. Bolt the window to the regulator. Using the bolts you removed earlier and the same extension, you need to bolt your window back to the regulator. Test your window. It should now move up and down freely when you press the switch.
When you pop the hood and look at the complicated mechanical devices called engines, you notice right away there's plenty of wiring. In fact, the wires seem to snake around the engine in a complex configuration that makes little sense to anyone who is not a mechanic. Auto engines have plenty of electrical configurations that are critical to their smooth operation. The fact is that when a car experiences problems, it could easily be an electrical problem as much as it could be a mechanical problem. Any qualified mechanic needs to be familiar with both mechanical and electrical problems in order to be efficient at his or her job. That means a mobile car mechanic must be prepared to complete a variety of repairs including those related to the electrical systems.