: 1024x768 px
: June 26, 2018
All 2012 and newer vehicles are required to have stability control, so they also have ABS and traction control. Many older cars also have some or all of those features. The ABS light (usually yellow, amber or orange) should come on briefly every time you start your car as part of a system check. If the light stays on, that means something isn't working and the system has been shut down.
Attach the leads of the multi-meter to where the electrical wires come into the motor. Again, set it to DC volts and it should read 12 volts. Look for any interrupted voltage caused by a loose connector or corrosion. If there are any loose or corroded connections in the circuit they will disrupt the signal and cause your window to malfunction. Fix the connector or corroded areas. Push any connectors or wiring harnesses together tightly, and clean any corrosion away with a wire brush or similar tool. Test the window again. If your problem was in the circuitry and is now fixed, then your window should freely roll up and down without any restrictions or delays.