: 2048x1536 px
: July 4, 2018
Use a multi-meter to confirm that the switch is getting 12V of power. Attach the leads of the multi-meter to where the electrical wires come into the switch and set the meter to DC volts. It should read 12 volts. Trace the wiring from the switch to the motor. This is the path that a signal will travel to move your window when you press the switch. Any breaks or loose connections in this path will prevent your motor from functioning properly. Use the multi-meter to confirm that the motor is getting 12V of power.
Locate a replacement fuse. It must be the rated for the same amperage as the original fuse that operated the window mechanism. The amp rating should be printed on the fuse, and it should also be listed in your owner’s manual. Do not use a fuse with a higher amp rating, as this may lead damaging the electrical components of your vehicle. Push the new fuse straight down into the cradle. The fuse must be "set". This means that it does not move or wobble. Turn your car key to the "on" position. This provides power to your windows and allows you to test them. You need not start your car. Test your windows. Confirm that they go up and down without restriction.