: 1179x1424 px
: March 23, 2018
All batteries, even those using gel instead of electrolyte lose charging capacity as the time passes. The reason for this is that the chemical breakdown of the connections inevitably takes place leading to the deterioration of the plates and loss of the electrolyte. When your vehicle has start up or charging problems, the vehicle troubleshooting procedure should start with a test of the battery. You do that with a visual check followed by a voltage test. If the battery is ok, other components of the electrical system is probably the reason, but battery problems are by far the most likely reason.
These can often be difficult to bolts to remove. You may need to use a ratchet with a long extension to provide the necessary angle to access and turn the bolts. Pull the motor and harness out as one assembly. Once you have the assembly removed, you can separate the two pieces and replace the one that is malfunctioning. Re-install the motorregulator assembly. Once you have replaced the malfunctioning part, whether it was the motor or the regulator, it is time to slide the assembly back into the door's interior and bolt it back into it's original position.