Use a multi-meter to make sure that the motor is getting the correct voltage. Attach the probes of your multi-meter to the motor’s plug and toggle the switch up and down. Make note of the voltage in both directions. Your owner’s manual should list the specific voltage required. Ensure that the window moves freely during this test. There should be no slow spots or blockages. Unplug the motor. If you the motor is getting the proper voltage but not functioning properly, you likely need to replace it. Start by unplugging the wiring connectors from the motor.
Of course, there are plenty of wiring problems an engine can experience and they can be very difficult to locate unless the mechanic is experienced. Analysing electrical problems requires using special equipment combined with mechanic expertise. Today's engines are extremely sophisticated combinations of electronics, electrical wiring, and moving parts and seem like they are half-computer and half-mechanical.
Here's what causes this: A blown fuse for the system, A wheel-speed sensor that is damaged or covered by road grime, A broken wire between the sensors and the ABS controller, An ABS controller that has stopped working. A pump and valve that apply the right amount of brake fluid pressure to each wheel to prevent locking can also trigger an ABS sensor warning light when those items go bad. If the red warning light for the regular brakes comes on, that typically means your vehicle is losing brake fluid or the brakes are so worn that you don't have normal stopping power. Either of those situations warrants immediate attention and possible repair work.
Sometimes, what people bother so much about turn out to be problems whose solutions are extremely obvious. This conversely means that checks for electrical problems in cars should start at the most obvious locations; the battery being a good example. Sometimes, a case of a car failing to 'start' or something of that sort could be simply as a result of an electrical contact breakdown at the battery. Here all that is required in the name of auto electrical repairs is something as simple as filing the terminals that connect the car to its battery.