: 1416x859 px
: June 23, 2018
Here's what causes this: A blown fuse for the system, A wheel-speed sensor that is damaged or covered by road grime, A broken wire between the sensors and the ABS controller, An ABS controller that has stopped working. A pump and valve that apply the right amount of brake fluid pressure to each wheel to prevent locking can also trigger an ABS sensor warning light when those items go bad. If the red warning light for the regular brakes comes on, that typically means your vehicle is losing brake fluid or the brakes are so worn that you don't have normal stopping power. Either of those situations warrants immediate attention and possible repair work.
Assuming that the battery is known to be good, then the next item to check is the battery terminals - the actual points at which the battery is connected into the electrical system. It is very important that these connections are clean and tight. This simple thing is often overlooked as a source of trouble, and is also a frequent cause of such trouble. Visually inspect the terminals, and clean andor tighten them if needed. To clean, use a small, stiff wire brush or a terminal cleaner which is made for the purpose.