: 1200x1600 px
: July 8, 2018
Of course, there are plenty of wiring problems an engine can experience and they can be very difficult to locate unless the mechanic is experienced. Analysing electrical problems requires using special equipment combined with mechanic expertise. Today's engines are extremely sophisticated combinations of electronics, electrical wiring, and moving parts and seem like they are half-computer and half-mechanical.
Use your multi-meter to probe each connector. Set the multi-meter for DC volts and put the prongs of your multi-meter into the connector. It should read 12 volts. Check the wiring on any switch that has a low voltage reading. Tighten any loose connections, and clear away any corrosion. Test another switch. Take a switch from another door and plug it into the connectors on the malfunctioning door. If you are able to operate your window using this switch, then the original is bad and will need to be replaced. Buy a new switch. Contact your dealership or favorite parts store and get a new window switch. Install the new window switch. This can be done by plugging the connectors into the switch and popping the switch back into the door panel.