: 3264x2448 px
: July 8, 2018
Locate a replacement fuse. It must be the rated for the same amperage as the original fuse that operated the window mechanism. The amp rating should be printed on the fuse, and it should also be listed in your owner’s manual. Do not use a fuse with a higher amp rating, as this may lead damaging the electrical components of your vehicle. Push the new fuse straight down into the cradle. The fuse must be "set". This means that it does not move or wobble. Turn your car key to the "on" position. This provides power to your windows and allows you to test them. You need not start your car. Test your windows. Confirm that they go up and down without restriction.
Here's what causes this: A blown fuse for the system, A wheel-speed sensor that is damaged or covered by road grime, A broken wire between the sensors and the ABS controller, An ABS controller that has stopped working. A pump and valve that apply the right amount of brake fluid pressure to each wheel to prevent locking can also trigger an ABS sensor warning light when those items go bad. If the red warning light for the regular brakes comes on, that typically means your vehicle is losing brake fluid or the brakes are so worn that you don't have normal stopping power. Either of those situations warrants immediate attention and possible repair work.