: 1000x1000 px
: July 8, 2018
All batteries, even those using gel instead of electrolyte lose charging capacity as the time passes. The reason for this is that the chemical breakdown of the connections inevitably takes place leading to the deterioration of the plates and loss of the electrolyte. When your vehicle has start up or charging problems, the vehicle troubleshooting procedure should start with a test of the battery. You do that with a visual check followed by a voltage test. If the battery is ok, other components of the electrical system is probably the reason, but battery problems are by far the most likely reason.
The test procedure is quite simple. Set the meter to read DC volts, and set the correct range if needed. Some meters will select the correct range automatically. Nearly all meters will come with instructions on how to set them to read DC volts. Next, connect the meter across the vehicle battery, positive (+) to positive (+) and negative (-) to negative (-). With the engine running at a moderate idle - say 1200 to 1500 RPM, the meter should read approximately 13.8 to 14.8 volts and be steady. If the reading is substantially outside these figures and all other items mentioned have been tested and verified good, then the alternator is likely defective.