Bulbs, though, are probably No. 1 on the replacement list because they're used so much and because there are so many of them. Most cars, for example, have at least three bulbs and usually more on each side for brakes, taillights, backup lights, turn signals and side marker lights. In front, there are headlights, maybe separate high beams, frequently daytime running lights and fog lights, turn signals, "parking" lights and side markers. Chances are that over time at least a couple of those will burn out or stop working because of corrosion or excessive jostling from rough roads.
Starter: starting the car was a sweat-breaking business before the starter. A procedure by it's own, where you had to be fairly skilled. Cranking the car was done with a cranking rod. The driver would put it into place, use all the strength available, crank the engine and if he's lucky the engine would start after a few turns. If not, he was in for another lesson in body-building. Aside that, when the engine started the driver had to let loose of the rod in time or else he would get a knock in the face. Every time you put the key into the ignition, remember this and enjoy it as a privilege.
Quirky Problems Require Expert Repairs. There were 266,539 new vehicles sold in Victoria in 2008. There are over 3,921,574 cars on the road in Victoria. If you could talk to the various car owners who have experienced engine problems, odds are you would find the quirky problems are related to electrical issues. Fortunately the right diagnostic equipment can make it much easier to pinpoint the problem quickly.
3D wheel aligner - This auto diagnostic tool prevents accidents and allows more efficient use of tires and fuel. Most car repair shops have one of these because they help in saving a lot of any client's money. This auto electric repair tool consists of 3D cameras that track a vehicle's wheel movement and positioning from any height. Some functions like rolling compensation can be done without having to lift the car off the ground meaning that readings and subsequent adjustments are done in a very short time. A 3D wheel aligner has quite a number of components built into it, some of which include: Drive on camera aid, VIN scanner, Steering angle sensor, Universal wheel clamps etc.