: 1200x1200 px
: March 28, 2018
Starter: starting the car was a sweat-breaking business before the starter. A procedure by it's own, where you had to be fairly skilled. Cranking the car was done with a cranking rod. The driver would put it into place, use all the strength available, crank the engine and if he's lucky the engine would start after a few turns. If not, he was in for another lesson in body-building. Aside that, when the engine started the driver had to let loose of the rod in time or else he would get a knock in the face. Every time you put the key into the ignition, remember this and enjoy it as a privilege.
Replacing a Faulty Switch: Locate the window switch panel. This is the button used to operate your window. It is almost always on the door, however, they are rarely found on the center console. Remove the window switch panel. Be careful not to scratch up the door panel while removing the window switch, as it often requires prying. Using a shop rag or piece of cardboard under your prying tool can help. Unplug the wiring connectors from the switch. You will need to test these connectors to make sure that they are providing the appropriate 12 volts to your switch.