: 4320x3240 px
: December 22, 2017
Use a multi-meter to make sure that the motor is getting the correct voltage. Attach the probes of your multi-meter to the motor’s plug and toggle the switch up and down. Make note of the voltage in both directions. Your owner’s manual should list the specific voltage required. Ensure that the window moves freely during this test. There should be no slow spots or blockages. Unplug the motor. If you the motor is getting the proper voltage but not functioning properly, you likely need to replace it. Start by unplugging the wiring connectors from the motor.
If your vehicle is showing symptoms such as dim lighting, "dragging" during engine starts, or frequent dead batteries, then the charging system may be at fault. Although it may seem obvious, the first item to test is the battery itself. A defective battery in an otherwise healthy electrical system can cause any of the above mentioned symptoms. Testing the battery is a simple procedure, and can performed quickly by most auto parts stores, repair shops, dealers, and even some large department stores.